Burton Mill turbine in 2016, prior to work starting in its restoration. It had seized sometime around 2004.
5th April 2016. Turbine drained and inspection hatch opened to reveal...
... a lot of rust
Control rod joint (seized?)
View of control levers
Main control thins out...
View of the control vanes
Control shaft bearing...
View looking down to turbine
Turbine shed (taken standing on top of the cistern feeding the hydraulic ram by the mill race)
View of shed
Looking down from road level
The centre of the turbine is 7.5m from kerb
Outflow pipe into former wheel pit